ER14505 lithium batteries

Eunicell ER14505 AA 3.6V Lithium Battery  Li-SOCL₂  3.6 Volt Lithium Thionyl Chloride Battery Non-Rechargeable

Specification: 
Norminal Capacity: 2700mAh(at 1.0mA +25 ° C 2.0V cut off)

Norminal Voltage: 3.6 V

Max Continuous Discharge Current: 100mA

Max Pulse Discharge Current: 200mA

Weight: 19g

Diameter: 14.5mm

Height: 50.5mm

Operating Temperature: -40 ° C ~ +85 ° C

Storage(recommended) : Max. 30 ° C

Self-discharger Rate: ≤1%

Applications  

● Utility metering  
● Memory back-up
● Alarms and security devices
● Automotive electronics
● Tollgate systems
● Military electronics
● Automatic meter reading
● professional electronics

What if your battery doesn't work when connected to the device?

1. Test the OCV(Open Circuit Voltage). You can use the multi-meter to test the voltage. Standard voltage should be no less than 3.6V. If your battery is lower than 3.6V, please tell us.

2. Test loading voltage. The loading voltage should be around 3.2V. If your loading voltage is higher than 3.2V, the battery is in good condition. Due to the passivation characteristic of lithium thionyl chloride, your loading voltage may not reach 3.2V immediately. You can connect the battery with a resistor and activate it with a multimeter. When the loading voltage of the battery reaches 3.2V, then the activation is successful and the battery can be used.

3. If the battery fails to activate or is still unusable after activation, please contact us for help.